Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Not using regular power source (voltage out of range); Low voltage from utility; Faulty outlet or wiring; Voltage sense circuit fault on main PCB
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness
- 2
2. Check if power is supplied properly -- measure voltage at the outlet: should be 120V/240V
- 3
3. Check for blown fuse or tripped circuit breaker
- 4
4. Verify dryer is on a dedicated 30-amp circuit
- 5
5. If voltage is correct, inspect voltage sense circuit on main PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE45T6005 Series Dryers (2024) (2024–present)
Related Error Codes
Your dryer's temperature sensor isn't reading correctly
A secondary temperature sensor is giving bad readings
A button on the control panel is stuck or shorted
The dryer thinks the door is open while running
The door switch isn't working properly
Your dryer is getting the wrong type of electrical power
The dryer's internal parts aren't communicating properly
Your dryer isn't heating properly or is overheating