Error Code tC
Your dryer's temperature sensor isn't reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: tC
What This Means
Clogged lint screen restricting airflow and causing abnormal temperature readings; Restricted vent system causing heat buildup; Thermistor 1 resistance out of range (open or shorted)
What actually causes this:
Usually a clogged lint screen or blocked exhaust vent — restricted airflow causes the sensor to misread temperatures.
First Thing to Check
Pull out the lint screen and clean off all the lint, then check that your exhaust vent hose isn't kinked or blocked.
Parts Involved
How to Fix
- 1
1. Check and clean the lint screen
- 2
2. Inspect the exhaust vent system for restrictions or blockages
- 3
3. Measure thermistor 1 resistance: should be 10KOhm at 25C (77F) — Blue & Red wire
- 4
4. If thermistor resistance is out of range, replace the thermistor
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE52M8650 Series Dryers
Related Error Codes
The dryer's internal parts aren't communicating properly
A button on the control panel is stuck or shorted
Your dryer is getting the wrong type of electrical power
The door switch isn't working properly
A secondary temperature sensor is giving bad readings
The dryer thinks the door is open while running
Your dryer is getting the wrong voltage from the outlet
Your dryer isn't heating properly or is overheating