Error Code CLg
Your dryer vent is clogged and needs cleaning
Moderate
Address soon - your appliance may not work properly
Also displayed as: CLg
What This Means
Lint buildup in exhaust duct; Crushed or kinked exhaust duct; External exhaust hood blocked or stuck closed; Excessive duct length or too many elbows; Lint filter clogged
What actually causes this:
Lint has built up inside the exhaust vent over time, restricting airflow and making your dryer work harder.
First Thing to Check
Pull the dryer away from the wall and disconnect the exhaust vent hose — check for packed lint inside.
Parts Involved
How to Fix
- 1
1. Clean the lint filter thoroughly
- 2
2. Check the vent condition and duct routing
- 3
3. Refer to the ducting requirements section for proper duct specifications
- 4
4. Inspect the entire exhaust path from dryer to exterior wall
- 5
5. Must take measures (such as cleaning) through expert personnel
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE54R7600 Series Dryers
Related Error Codes
Your dryer's temperature sensor isn't reading correctly
The door switch isn't working properly
The dryer's internal parts aren't communicating properly
A button on the control panel is stuck or shorted
Your dryer is getting the wrong voltage from the outlet
A secondary temperature sensor is giving bad readings
The dryer's internal parts aren't communicating properly
The dryer thinks the door is open while running