Error Code C-d1
Door locking mechanism failed to engage or disengage
Moderate
Address soon - your appliance may not work properly
Also displayed as: C-d1
What This Means
Door lock motor not connected or failed; Door lock switch malfunction; Harness disconnected from door lock; Failed lock motor coil; Damaged door lock micr oswitch
What actually causes this:
Broken motor coil, failed micr oswitch, or faulty lock relay
First Thing to Check
Measure door lock motor resistance (should be 1750-1850 Ohms)
Parts Involved
How to Fix
- 1
Disconnect power and check harness connection to door lock switch and motor
- 2
Confirm whether resistance value of door lock motor is normal (1750-1850 Ohms at room temperature)
- 3
Measure voltage at lock motor terminals during lock operation (Normal: AC 120V)
- 4
Check whether door locking switch is working normally
- 5
Check connector at CN203 of wall main PCB
This Error Applies To
Samsung DOP36M94DL Series Ovens & Ranges
Related Error Codes
Temperature sensor open circuit detected
PCB internal temperature abnormally high or sensor shorted
Probe temperature sensor has short circuit
Temperature regulation failure causing excessive oven temperature
Inter-PCB communication link failure detected
Touch screen panel communication with main control board lost
Main PCB internal temperature sensor failed
Steam system temperature sensor open or short circuit