Error Code C-10
Oven sensor is open when the oven is operating
Moderate
Address soon - your appliance may not work properly
What This Means
Connector at Main PCB not inserted; Connector at sensor not inserted; Temperature sensor failed open
How to Fix
- 1
Check whether connector at the Main PCB has been inserted
- 2
Check whether connector at the sensor has been inserted
- 3
If connectors at Main PCB and sensor are inserted correctly, replace the temperature sensor
- 4
If problem still not solved, replace the Main PCB
This Error Applies To
Samsung NE Series Ovens & Ranges
Related Error Codes
Communication between Main PCB and Touch PCB is interrupted
Internal temperature rises abnormally high — safety error
Communication between Main PCB and Sub PCB is interrupted
Key short circuit — keypad short detected on Sub PCB
PCB temp sensor is short when oven is operating
Door lock is mispositioned — door lock motor or switch fault during self-clean
PCB temperature rises abnormally high
PCB temp sensor is open when oven is operating