Error Code E-0E
Door lock mechanism is not responding
Moderate
Address soon - your appliance may not work properly
Also displayed as: E-0E
What This Means
Door lock switch failure; Door lock motor resistance out of normal range; Harness disconnection from door lock switch and motor; Micro switch not functioning normally; Main PCB relay failure (RY510)
What actually causes this:
Motor failure, connector issue, or control board problem
First Thing to Check
Check harness connection to door lock motor and measure resistance
Parts Involved
How to Fix
- 1
Disconnect power and open back cover
- 2
Check whether harness is connected with door lock switch and motor
- 3
Confirm resistance value of door lock motor is normal
- 4
With door lockout operating, measure voltage of connector on harness linked with door lock motor
- 5
Check whether door locking switch is working normally
- 6
Verify micro switch COM-NO continuity
This Error Applies To
Samsung NE58F9710W Series Ovens & Ranges (2013) (2013–present)
Related Error Codes
Main and sub control boards cannot communicate
Keypad circuit short detected
Meat probe is shorted or has short circuit
Keypad has a short circuit
Touch control panel is not communicating with sub board
Touch control communication failure
Temperature sensor circuit is broken open
Temperature sensor wires are shorted together