Error Code -dC-

Partition switch malfunction or door sensor circuit failure

What This Means

Faulty partition switch; Loose or disconnected harness to partition switch; Damaged main PCB; Circuit pattern issue at CN401

How to Fix

1. 1

   Disconnect power

2. 2

   Remove wiring from partition switch

3. 3

   Measure resistance of partition switch (should be 1750-1850Ω)

4. 4

   Check if harness connected normally to CN401 of main PCB

5. 5

   Measure resistance at CN401 of main PCB (pin 6-pin 7 should be ∞)

6. 6

   Replace partition switch if defective

7. 7

   Repair or replace harness if damaged

8. 8

   Replace main PCB if pattern is damaged or parts wrongly contacted

This Error Applies To

Samsung NE595R1ABS Series Ovens & Ranges