Error Code C-d1
Safety error - Door lock motor or sensor circuit malfunction
Moderate
Address soon - your appliance may not work properly
What This Means
Faulty lock motor; Faulty micro switch; Damaged main PCB; Loose or damaged harness to lock motor; Faulty oven sensor; No AC 120V voltage to lock motor
How to Fix
- 1
Disconnect power
- 2
Remove harness connected with lock motor
- 3
Check micom switch (COM-NC, COM-NO)
- 4
Measure resistance of lock motor coil (should be 1750-1850Ω at room temperature)
- 5
Check oven sensor per page 31 procedure
- 6
Check harness connection at CN501 of main PCB
- 7
Measure resistance at CN501 of main PCB (COM-NO should be ∞)
- 8
Verify AC 120V voltage is supplied to lock motor during operation
- 9
Replace micro switch or lock motor if defective
- 10
Replace main PCB if pattern is damaged or parts wrongly contacted
This Error Applies To
Samsung NE595R1ABS Series Ovens & Ranges