Error Code C-23
Temp probe sensor is shorted when oven is operating
Moderate
Address soon - your appliance may not work properly
What This Means
Meat probe resistance incorrect; Probe harness damaged; Probe connector terminal damaged; Main PCB connector resistance incorrect
How to Fix
- 1
Disconnect power. Disconnect Probe harness from control board. Measure probe resistance: 50kΩ at room temperature
- 2
Check wire harness and connector terminals for damage if probe is faulty
- 3
Check resistance of meat probe connector on main PCB (Normal: 10kΩ ~ 11kΩ)
This Error Applies To
Samsung NV51K6650 Series Ovens & Ranges (2020) (2020–present)
Related Error Codes
PCB temp sensor is open or shorted when oven is operating
PCB temperature rises abnormally high
Steam sensor is open or shorted when steam mode is on
Drain system problem - Water level sensor senses water remaining after maximum draining time
Cooling motor is operating abnormally
Door lock is mispositioned
Internal temperature rises abnormally high
Keys are shorted