What does error code C-F2 mean on a Samsung ovens & ranges?

Communication between the Main and Touch PCB is interrupted Sub PCB connector not inserted; Sub PCB damaged; Control PCB damaged

How do I fix error code C-F2 on a Samsung ovens & ranges?

1. undefined: Check whether connector of sub PCB has been inserted 2. undefined: Replace Sub PCB if no issue with connector on Sub PCB has been detected 3. undefined: Replace control PCB if problem persists after replacing Sub PCB

Samsung Ovens & Ranges2020–present

Error Code C-F2

Communication between the Main and Touch PCB is interrupted

Moderate

Address soon - your appliance may not work properly

What This Means

Sub PCB connector not inserted; Sub PCB damaged; Control PCB damaged

How to Fix

1
Check whether connector of sub PCB has been inserted
2
Replace Sub PCB if no issue with connector on Sub PCB has been detected
3
Replace control PCB if problem persists after replacing Sub PCB

This Error Applies To

Samsung NV51K6650 Series Ovens & Ranges (2020) (2020–present)

Service manual exact match: NV51K6650S*Service manual exact match: NV51K6650D*

Related Error Codes

C-23

Temp probe sensor is shorted when oven is operating

C-30

PCB temp sensor is open or shorted when oven is operating

C-31

PCB temperature rises abnormally high

C-70

Steam sensor is open or shorted when steam mode is on

C-72

Drain system problem - Water level sensor senses water remaining after maximum draining time

C-A2

Cooling motor is operating abnormally

C-d1

Door lock is mispositioned

C-21

Internal temperature rises abnormally high

Need more help with your Samsung ovens & ranges?