Error Code C-F2
Communication between Main and Touch PCB is interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Connector on Sub PCB not inserted; Ribbon cable from touch panel not connected normally into Sub PCB; Sub PCB damaged; Control PCB faulty
How to Fix
- 1
Check whether connector of Sub PCB has been inserted
- 2
If no issue with connector on Sub PCB detected, replace Sub PCB
- 3
If problem not solved after replacing Sub PCB, replace control PCB
- 4
Disconnect power; unplug connector on Sub PCB
- 5
Check if ribbon cable from touch panel is connected normally into Sub PCB
- 6
Repair damaged wire or replace
This Error Applies To
Samsung NV51R5511D Series Ovens & Ranges (2019) (2019–present)
Related Error Codes
Power connection is installed improperly
PCB temperature rises abnormally high
Oven sensor is open when the oven is operating
Keys are shorted
Communication between Main and Sub PCB is interrupted
Door lock is mispositioned
Upper cooling motor is operating abnormally
PCB temp sensor is open or shorted when the oven is operating