Prax
Sign InGet Started
Samsung Ovens & Ranges2023–present

Error Code C-F0

Communication error between main PCB and sub/display module, or between sub and LCD

Moderate

Address soon - your appliance may not work properly

What This Means

Loose or damaged communication wire harness between main and sub PCB; Defective sub PCB; Defective main PCB

How to Fix

  1. 1

    Check wire harness on Main PCB connector CNS600 and Sub PCB connector CNS200

  2. 2

    Reconnect communication wire if loose

  3. 3

    If communication wire is good, replace sub PCB

  4. 4

    If problem persists after sub PCB replacement, replace main PCB

This Error Applies To

Samsung NX60T8711 Series Ovens & Ranges (2023) (2023–present)

Service manual exact match: NX60T8711**Service manual exact match: NX60T8711SSService manual exact match: NX60T8711SGService manual exact match: NX60T8711SBService manual exact match: NX60T8711ST

Related Error Codes

C-21

Oven overheating - oven temperature sensor detects excessive heat or heating elements are stuck on

C-d0

Key short — dial knob is stuck or continuously pushed

C-d1

Door locking malfunction — door lock motor or switch failure

C-F2

Communication error between sub PCB and touch panel

C-24

Oven vent blocked — airflow restricted at oven vent or cover air

C-A2

Ambient temperature of display PCB is excessively hot — cooling fan failure

C-20

Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (under 930 ohms)

Need more help with your Samsung ovens & ranges?