What does error code C-F2 mean on a Samsung ovens & ranges?

Communication error between sub PCB and touch panel Touch film tail not fully connected; Defective sub PCB; Defective Assy Control Box

How do I fix error code C-F2 on a Samsung ovens & ranges?

1. undefined: Check that touch film tail is fully and correctly inserted into its connector 2. undefined: If tail is connected properly, replace sub PCB 3. undefined: If problem persists, replace Assy Control Box

Samsung Ovens & Ranges2023–present

Error Code C-F2

Communication error between sub PCB and touch panel

Moderate

Address soon - your appliance may not work properly

What This Means

Touch film tail not fully connected; Defective sub PCB; Defective Assy Control Box

How to Fix

1
Check that touch film tail is fully and correctly inserted into its connector
2
If tail is connected properly, replace sub PCB
3
If problem persists, replace Assy Control Box

This Error Applies To

Samsung NX60T8711 Series Ovens & Ranges (2023) (2023–present)

Service manual exact match: NX60T8711**Service manual exact match: NX60T8711SSService manual exact match: NX60T8711SGService manual exact match: NX60T8711SBService manual exact match: NX60T8711ST

Related Error Codes

C-21

Oven overheating - oven temperature sensor detects excessive heat or heating elements are stuck on

C-d0

Key short — dial knob is stuck or continuously pushed

C-d1

Door locking malfunction — door lock motor or switch failure

C-F0

Communication error between main PCB and sub/display module, or between sub and LCD

C-24

Oven vent blocked — airflow restricted at oven vent or cover air

C-A2

Ambient temperature of display PCB is excessively hot — cooling fan failure

C-20

Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (under 930 ohms)

Need more help with your Samsung ovens & ranges?