Error Code 8
Standard ice maker position or operation sensor is not responding
Moderate
Address soon - your appliance may not work properly
Also displayed as: Ice Maker Sensor Error
What This Means
Ice maker sensor disconnected or damaged; Wire cut or short circuit; Sensor failure from freezing cycles; Poor connection at ice maker module
What actually causes this:
Ice maker sensor wear or connection failure
First Thing to Check
Check DC BLU1 connector at pins 4 and 5
Parts Involved
How to Fix
- 1
Check voltage between Case Connector DC BLU1 #4 and #5
- 2
Expected voltage should be within 4.5V to 1.0V
- 3
Verify ice maker assembly is properly connected
- 4
Check wire continuity to control board
This Error Applies To
Samsung BRF425200A Series Refrigerators (2017) (2017–present)
Related Error Codes
Cocktail ice maker is not producing ice
Pantry compartment temperature sensor is not working
FlexZone compartment temperature sensor is broken or disconnected
Cocktail ice maker sensor is not responding
Ice maker water line heater is broken or disconnected
FlexZone compartment is not maintaining proper temperature
Rear cabinet heater element is broken or disconnected
Right compressor power module has detected a fault