Error Code F-1-ø
Compressor room fan is not working or not reporting rotation
Moderate
Address soon - your appliance may not work properly
Also displayed as: F-1-ø
What This Means
Fan motor failure; Feedback signal line contact error; Motor wire separation; Motor itself defective
What actually causes this:
Fan motor failed or bearings are locked
First Thing to Check
Check if there's warm air flowing from compressor area when unit is running
Parts Involved
How to Fix
- 1
1. Check if compressor is ON
- 2
2. Measure fan motor voltage at CN76-#4(Orange)
- 3
3. Verify motor voltage is DC 7~12V between REG1 and CN76-#4(Orange)
- 4
4. Check for pulse signal feedback during motor operation
- 5
5. Verify external temperature is above 66.2°F(19°C)
This Error Applies To
Samsung RF195AC Series Refrigerators (2009) (2009–present)
Related Error Codes
Refrigerator section temperature sensor is not working properly
Ice maker temperature sensor has failed and needs replacement
Freezer defrost sensor is not responding
Refrigerator defrost sensor is malfunctioning
Ice maker mechanism is not rotating or completing its cycle
Refrigerator fan is not spinning or not reporting rotation
Freezer temperature sensor is not working
Freezer defrost heater is not working or stuck on