Error Code CLV
House electrical power is too low
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: CLV LED blinks
What This Means
House voltage below 110V AC; Main PCB power supply failure; Loose power connection; Defective power cord
What actually causes this:
House voltage too low or refrigerator on same circuit as heavy appliance
First Thing to Check
Check if refrigerator is plugged into same outlet as large appliance
Parts Involved
How to Fix
- 1
1. Use multimeter to measure input power at wall socket
- 2
2. Should read AC 110-127V (North America) or AC 220-240V (Europe)
- 3
3. Check main power cord connection
- 4
4. Check PCB bottom side soldering
This Error Applies To
Samsung RF22R7351 Series Refrigerators (2010) (2010–present)
Related Error Codes
Flex Zone compartment is too warm right now
Ice duct heater is not working
Freezer temperature sensor is broken or disconnected
Outside temperature sensor is not working
Ice storage room temperature sensor is not working
Flex Zone damper heater circuit is broken
Main board and compressor inverter board cannot communicate
Refrigerator temperature sensor is broken or disconnected