Prax
Sign InGet Started
Samsung Refrigerators2010–present

Error Code EA

Outside temperature sensor is not working

Moderate

Address soon - your appliance may not work properly

Also displayed as: EA LED blinks

What This Means

Sensor wire disconnected from CN60; Thermistor resistance out of range; Bad connection at sensor

What actually causes this:

Loose or corroded sensor connection

First Thing to Check

Check if CN60 connector is fully seated on main board

Parts Involved

External Air Temperature Sensor

How to Fix

  1. 1

    1. Measure voltage at MAIN PCB CN60-3 to CN60-5

  2. 2

    2. Voltage should be between 4.5V and 1.0V

  3. 3

    3. Check connector seating

  4. 4

    4. Verify thermistor readings

This Error Applies To

Samsung RF22R7351 Series Refrigerators (2010) (2010–present)

Service manual exact match: RF22R7351AAService manual exact match: RF22R7351AZService manual exact match: RF22R7351EFService manual exact match: RF22R7351EU

Related Error Codes

FZHT

Flex Zone compartment is too warm right now

IDH

Ice duct heater is not working

F

Freezer temperature sensor is broken or disconnected

IR

Ice storage room temperature sensor is not working

FLXD

Flex Zone damper heater circuit is broken

CI

Main board and compressor inverter board cannot communicate

R

Refrigerator temperature sensor is broken or disconnected

FZ

Flex-Zone temperature sensor is broken or disconnected

Need more help with your Samsung refrigerators?