Error Code ICE_MAKER_SENSOR_CUBED
Cubed ice maker temperature sensor is faulty
Moderate
Address soon - your appliance may not work properly
Also displayed as: F blinks (Cubed ice maker indicator)
What This Means
Connector CN90 pins 14/26 loose; Ice maker sensor open or shorted; Wiring damage to ice maker assembly
What actually causes this:
The thermistor inside the cubed ice maker has failed, so the board cannot detect when ice has frozen and is ready to harvest.
First Thing to Check
Check that the ice maker wiring connector going to CN90 is fully plugged in at the back of the freezer compartment.
Parts Involved
How to Fix
- 1
Verify voltage at MAIN PCB CN90 pins 14 and 26 is between 1.0V and 4.5V
- 2
Measure resistance at ICE MAKER (Cubed): CN90 '14' ↔ '26'
- 3
Check measuring resistor R925 (IC01 MICOM #14)
This Error Applies To
Samsung RF23BB89 Series Refrigerators (2023) (2023–present)
Related Error Codes
Fridge compartment defrost sensor is faulty or disconnected
Ice bites maker temperature sensor is faulty
Fridge compartment temperature sensor reading is out of range
FlexZone compartment temperature sensor is faulty
Ice bites maker is not completing its cycle
Freezer defrost sensor is faulty or disconnected
Freezer fan motor is not running or not sending feedback
Freezer temperature sensor reading is out of range