Error Code 53E
Fridge compressor rotor position could not be detected due to abnormal current
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 53E
What This Means
Compressor wire connection incorrect or loose; Inverter PCB solder defect or short; Compressor or cycle issue
What actually causes this:
Phase wire connected incorrectly or inverter PCB solder defect causing abnormal current readings.
First Thing to Check
Verify the three compressor phase wires are seated in the correct order at the R Room inverter connector.
Parts Involved
How to Fix
- 1
Check compressor wire connections at R Room inverter PCB CN101
- 2
Inspect PCB soldering for shorts
- 3
Check compressor and refrigeration cycle
This Error Applies To
Samsung RF32FM Series Refrigerators (2013) (2013–present)
Related Error Codes
Wall voltage too low for freezer compressor to run
Fridge compartment defrost sensor has failed or come loose
Freezer defrost sensor is failed or disconnected
Cool Select Room defrost sensor is failed or loose
Freezer temperature sensor is open, shorted, or disconnected
Outside air temperature sensor has failed or lost connection
Fridge section ice maker sensor is open, shorted, or out of range
Fridge fan motor stopped or lost feedback signal