Error Code OP-Er
Panel board and main board have mismatched option configuration
Moderate
Address soon - your appliance may not work properly
Also displayed as: OP - Er
What This Means
Panel PCB and Main PCB option settings incompatible; EEPROM data corruption; Incorrect PCB replacement (wrong model option)
What actually causes this:
Wrong replacement PCB installed for this model, or EEPROM data was corrupted.
First Thing to Check
Confirm that any recently replaced PCBs are the exact correct part numbers for the RF32FM** model.
Parts Involved
How to Fix
- 1
Power cycle the unit
- 2
Verify that the replacement PCBs are the correct model-specific parts
- 3
Check EEPROM option settings via option mode (Freezer + Energy Saver for 12 seconds)
This Error Applies To
Samsung RF32FM Series Refrigerators (2013) (2013–present)
Related Error Codes
Wall voltage too low for freezer compressor to run
Fridge compartment defrost sensor has failed or come loose
Freezer defrost sensor is failed or disconnected
Cool Select Room defrost sensor is failed or loose
Freezer temperature sensor is open, shorted, or disconnected
Outside air temperature sensor has failed or lost connection
Fridge section ice maker sensor is open, shorted, or out of range
Fridge fan motor stopped or lost feedback signal