Error Code 17
Humidity sensing circuit malfunction
Moderate
Address soon - your appliance may not work properly
Also displayed as: 13
What This Means
Humidity sensor open circuit; Humidity sensor short circuit; Connector separation or poor contact; Wire cut or broken; Water infiltration into sensor
What actually causes this:
Humidity sensor wire disconnected or sensor failed
First Thing to Check
Inspect humidity sensor wiring for damage
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN30 #2 and #3 should be 4.5V to 1.0V
- 2
Measure humidity sensor resistance
- 3
Inspect connector for proper seating
- 4
Look for moisture in sensor housing
- 5
Test with multimeter for continuity
This Error Applies To
Samsung RR39M73 Series Refrigerators
Related Error Codes
Condenser fan motor not operating when required
External humidity sensor reading is out of range
Cooling fan motor is not operating properly
Fridge room temperature sensor is malfunctioning
Freezer defrost temperature sensor malfunction detected
Freezer defrost cycle cannot complete properly
Compressor power control module failure
House electrical supply voltage too high