Error Code 07
Room temperature measurement not functioning
Moderate
Address soon - your appliance may not work properly
Also displayed as: Left - ① LED ON
What This Means
Sensor connector missing or loose; Contact failure at connector; Wire cut or damaged; Short circuit at sensor location
What actually causes this:
Thermistor located in upper hinge cover fails or connector corrodes
First Thing to Check
Check CN30 connector seating and inspect ambient sensor location
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN30 #1 and #2
- 2
Voltage should be within range 4.5V ~ 1.0V
- 3
Verify connector seating
This Error Applies To
Samsung RS25J50 Series Refrigerators (2010) (2010–present)
Related Error Codes
Damper heater not responding or circuit open
Defrost heater temperature sensing not working
Compressor fails to operate or protection activated
Ice maker sensor malfunction or connection issue
Microcontroller communication failure between boards
Ice maker ejection or level detection malfunction
Freezer evaporator fan not operating properly
Refrigerator compartment temperature measurement failure