Error Code DE2
The washer detected that the door was opened while running
Moderate
Address soon - your appliance may not work properly
Also displayed as: Hot&High LED flash
What This Means
Door/lid opened during operation; Door switch defective; Power cord disconnected or insulation issue; Main PBA door detection circuit defective
What actually causes this:
The lid was opened during a wash cycle
First Thing to Check
Close the lid fully and press Start to resume the cycle
Parts Involved
How to Fix
- 1
1. Check if a Hot & High LED flash during the cycle
- 2
2. Close the door
- 3
3. Since 120V power is connected, check if the power cord is disconnected or check the insulation status and repair if necessary
- 4
4. If the main PBA door detection circuit is defective, replace it
This Error Applies To
Samsung WA41A3000A Series Washers (2024) (2024–present)
Related Error Codes
The washer lid is open while it's trying to run
The control boards inside the washer can't communicate
Water is leaking inside the washer
Too much water is in the washer or the water level sensor failed
The laundry load is uneven and the washer can't spin safely
The incoming water is too hot
A button on the washer control panel appears stuck
The washer can't detect the water level properly