Error Code OE
Water is leaking inside the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: High LED flash
What This Means
Foreign substance in the DV Case; Product internal hose defective; Part assembly defective causing water leak; Drain motor defective; Water leak from tub connection part
What actually causes this:
A hose inside the washer has come loose or cracked, allowing water to leak
First Thing to Check
Unplug the washer immediately and check for water on the floor around and under it
Parts Involved
How to Fix
- 1
1. Check if there is foreign substance in the Draining Bellows — remove it for natural draining
- 2
2. If the drain motor is defective, replace the motor
- 3
3. Check if the water leaks from the tub connection part
This Error Applies To
Samsung WA41A3000A Series Washers (2024) (2024–present)
Related Error Codes
The washer lid is open while it's trying to run
The control boards inside the washer can't communicate
Too much water is in the washer or the water level sensor failed
The laundry load is uneven and the washer can't spin safely
The incoming water is too hot
A button on the washer control panel appears stuck
The washer can't detect the water level properly
The washer isn't filling with water