Error Code BC2
A button on the washer control panel appears stuck
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Power switch or tact switch continually pressed; Service PBA holding screws too tight; Main PBA switching IC fault; Main relay connections incorrect
What actually causes this:
A button got stuck or screws inside are pressing against a switch
First Thing to Check
Press each button on the control panel firmly once to unstick it
Parts Involved
How to Fix
- 1
1. Check contact between control panel buttons and their corresponding tact switches — must be a gap between button and micro switch
- 2
2. Check if PBA holding screws are too tight — loosen slightly
- 3
3. If main PBA switching IC on/off error occurred, replace main PBA
- 4
4. Check main relay connections — E2 error occurs if incorrect
This Error Applies To
Samsung WA44A3205AW Series Washers (2024) (2024–present)
Related Error Codes
The control boards inside the washer can't communicate
The washer isn't getting enough power
The washer's motor controller can't communicate with the main computer
The washer lid is open while it's trying to run
The laundry load is uneven and the washer can't spin safely
The washer added an extra rinse because the load was uneven
The washer can't detect the water level properly
The washer's motor isn't working