Error Code bE2
A button on the control panel appears stuck
Moderate
Address soon - your appliance may not work properly
Also displayed as: bE2
What This Means
Power button continually pressed (>12 seconds); Switch jammed from deformed panel; Sub PBA screws too tight; Other button pressed >30 seconds; Deformed internal plastic injection part
What actually causes this:
A button got stuck or internal screws are too tight
First Thing to Check
Press each button firmly to unstick it
Parts Involved
How to Fix
- 1
1. Check gap between control panel buttons and tact switches
- 2
2. Loosen PBA holding screws if too tight
- 3
3. If main PBA switching IC error, replace main PBA
- 4
4. Check main relay connections — 'E2' error if incorrect
This Error Applies To
Samsung WA45H7000AW Series Washers (2024) (2024–present)
Related Error Codes
The display module can't communicate with the main board
The motor controller can't communicate with the main board
The water temperature sensor isn't working right
The laundry load is uneven
There are too many soap suds
An internal sensor board has stopped working
The washer's main computer chip has failed
The washer is getting too much power