Error Code LE
Water is leaking inside the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LE
What This Means
Air hose out of place causing leakage during spin; Tub back at safety bolts broken; Front foaming from too much detergent; Detergent drawer hose connected incorrectly; Drain pump filter cover engaged incorrectly; Drain hose leakage; Duct condensing holding screws worn; Nozzle-diaphragm engaged in opposite direction or rubber packaging omitted; Tub back/front screws fastened incorrectly; Leakage sensor faulty
What actually causes this:
A hose came loose, the drain filter isn't sealed properly, or too much detergent caused overflow
First Thing to Check
Unplug the washer and check for water on the floor
Parts Involved
How to Fix
- 1
1. Check for leakage on base, hose, valve and tub connections
- 2
2. Check drain bellows for foreign material
- 3
3. Check drain motor operation
- 4
4. Check leakage sensor
This Error Applies To
Samsung WA45H7000AW Series Washers (2024) (2024–present)
Related Error Codes
The display module can't communicate with the main board
The motor controller can't communicate with the main board
The water temperature sensor isn't working right
The laundry load is uneven
There are too many soap suds
An internal sensor board has stopped working
The washer's main computer chip has failed
The washer is getting too much power