Error Code LC
The washer has detected a water leak
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC
What This Means
Leakage on the base, hose, valve, or tub connections; Foreign material in the DV case; Drain bellows clogged with foreign material during natural draining; Fault of a hose or incorrect part connections in the product; Drain hose end placed incorrectly (not on the floor)
What actually causes this:
The drain hose is not positioned correctly or has come loose from its connection
First Thing to Check
Check the drain hose at the back of the washer — make sure the end is placed at floor level and is not clogged
Parts Involved
How to Fix
- 1
1. Check for any leakage on the base, hose, valve, and tub connections and take required action
- 2
2. Make sure the end of the drain hose is placed on the floor
- 3
3. Make sure the drain hose is not clogged
- 4
4. Check if drain bellows are clogged with foreign material during natural draining — remove the foreign material
- 5
5. Check the drain motor operation — replace if it does not operate normally
This Error Applies To
Samsung WA45T3200AW Series Washers (2024) (2024–present)
Related Error Codes
The washer door is stuck locked and cannot open
The water inside the washer is dangerously hot
The dryer temperature sensor has failed
Water is leaking from inside the washer
Too much water is filling the washer
The washer cannot detect where the clutch is positioned
A temperature sensor is giving abnormal readings
A temperature sensor is giving abnormal readings