How do I fix error code PC1 on a Samsung washers?

1. undefined: 1. Check the clutch hall sensor connector and wiring for intermittent connections 2. undefined: 2. Check the Hall Sensor voltage at Pin 5 (Clutch Hall IC) during operation 3. undefined: 3. Inspect the clutch assembly for wear 4. undefined: 4. If the hall sensor is faulty, replace it 5. undefined: 5. If the clutch mechanism is worn, replace the clutch assembly

Samsung Washers2024–present

Error Code PC1

Q: What does error code PC1 mean on a Samsung washers?

The clutch sensor signal dropped out during operation Clutch hall sensor intermittently defective; Wire connection to clutch hall sensor loose or damaged; Clutch mechanism worn causing intermittent signal loss; Main PBA fault

The clutch sensor signal dropped out during operation

Moderate

Address soon - your appliance may not work properly

Also displayed as: PC1

What This Means

Clutch hall sensor intermittently defective; Wire connection to clutch hall sensor loose or damaged; Clutch mechanism worn causing intermittent signal loss; Main PBA fault

What actually causes this:

The clutch sensor has a loose wire that disconnects when the washer vibrates during spinning

First Thing to Check

Turn off the washer and restart — if the error keeps happening during spin, it needs service

Parts Involved

Clutch AssemblyClutch Hall SensorMain PBA

How to Fix

1
1. Check the clutch hall sensor connector and wiring for intermittent connections
2
2. Check the Hall Sensor voltage at Pin 5 (Clutch Hall IC) during operation
3
3. Inspect the clutch assembly for wear
4
4. If the hall sensor is faulty, replace it
5
5. If the clutch mechanism is worn, replace the clutch assembly