Error Code BC2
A button on the control panel appears to be stuck or pressed continuously.
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Button stuck due to deformation; Sub PBA screws too tight; Control panel button pressed unevenly
What actually causes this:
A button on the control panel is physically stuck, often from spilled detergent or liquid getting behind the button.
First Thing to Check
Press each button on the control panel to see if any feels stuck or does not spring back.
Parts Involved
How to Fix
- 1
1. Check gap between control panel buttons and tact switches
- 2
2. Loosen PBA holding screws if too tight
- 3
3. If main PBA switching IC error, replace main PBA
- 4
4. Check main relay connections — E2 error if incorrect
This Error Applies To
Samsung WA50B5100A Series Washers (2024) (2024–present)
Related Error Codes
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The washer's main computer chip has stopped working.
The drain module has lost communication with the main control board.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.