Error Code dC2
The door lock mechanism is not working due to a wiring issue.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC2
What This Means
Wire disconnected from door lock switch; Door lock switch unit defective; Main PCB fault
What actually causes this:
A wire has come loose from the door lock switch assembly.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check the disconnection of the wire
- 2
2. Check whether the door lock switch unit is defective
- 3
3. If the door lock switch unit is defective, replace it
- 4
4. If the main PCB is defective, replace it
This Error Applies To
Samsung WA50B5100A Series Washers (2024) (2024–present)
Related Error Codes
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The washer's main computer chip has stopped working.
The drain module has lost communication with the main control board.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.