Error Code TC1
The washer's water temperature sensor is not reading correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing temperature sensor fault; Faulty connection or disconnected connector; Main PCB fault; Freezing in the winter season
What actually causes this:
The temperature sensor connector has come loose or the sensor itself has failed.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check the connections for the washing heater temperature sensor connector
- 2
2. If the washing heater temperature sensor has a functional error, replace it
- 3
3. Check for frozen conditions in winter
- 4
4. If main PCB is faulty, replace it
This Error Applies To
Samsung WA50B5100A Series Washers (2024) (2024–present)
Related Error Codes
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The washer's main computer chip has stopped working.
The drain module has lost communication with the main control board.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.