Error Code AC3
The washer's DR module lost communication with the main board.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC3
What This Means
Signals between the DR Module and main PBAs are not sensed due to communication failure; Incorrect or loose connector connections between DR Module and main PBAs; Faulty soldering on DR Module
What actually causes this:
A wiring connector inside the washer has vibrated loose over time.
First Thing to Check
Unplug the washer for 2 minutes and plug it back in to reset.
Parts Involved
How to Fix
- 1
1. Check the connector connections between the DR Module and main PBAs carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the DR Module and check for any faulty soldering
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WA50K8600A Series Washers (2016) (2016–present)
Related Error Codes
The washer's temperature sensor is giving wrong readings.
The washer has detected a water leak.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's vibration sensor has a data error.
The washer's vibration sensor board has failed.
The washer cannot determine the clutch position for switching between wash and spin.