Error Code SUD
There are too many soap suds in the washer.
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD or SUdS
What This Means
Too much detergent used; Non-HE detergent used in HE washer; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular (non-HE) detergent was used instead of High Efficiency detergent.
First Thing to Check
Let the washer finish its suds-reduction cycle — it will handle this automatically. Next time, use less detergent.
How to Fix
- 1
1. Verify customer is using HE (High Efficiency) detergent
- 2
2. Check amount of detergent being used
- 3
3. 'SUdS' displayed during foam removal, 'End' displayed when removal is finished
- 4
4. Normal cycle proceeds after foaming is removed
This Error Applies To
Samsung WA50K8600A Series Washers (2016) (2016–present)
Related Error Codes
The washer's temperature sensor is giving wrong readings.
The washer has detected a water leak.
A specific internal water leak has been found.
The washer's vibration sensor board has a problem.
The washer's vibration sensor has a data error.
The washer's vibration sensor board has failed.
The washer cannot determine the clutch position for switching between wash and spin.
The washer's clutch position sensor is sending incorrect signals.