Error Code TC2
The washer's drying temperature sensor is not reading correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC2
What This Means
Dry heater temperature sensor fault; Condensing sensor fault; Connector connected incorrectly or disconnected; Freezing in winter season
What actually causes this:
The drying temperature sensor has failed or its connector has come loose.
First Thing to Check
Unplug the washer for 5 minutes and plug it back in to reset.
Parts Involved
How to Fix
- 1
1. Check the dry heater temperature sensor connections and connector
- 2
2. Check condensing sensor connections
- 3
3. If the dry heater temperature sensor has a functional check, replace it
- 4
4. Check main PCB for faults
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WA50K8600A Series Washers (2016) (2016–present)
Related Error Codes
The washer's temperature sensor is giving wrong readings.
The washer has detected a water leak.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's vibration sensor has a data error.
The washer's vibration sensor board has failed.
The washer cannot determine the clutch position for switching between wash and spin.