Error Code 9C2
Your washer is receiving too much electrical power.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C2
What This Means
Over-voltage supplied to the washer; Unstable household power supply; Main PBA fault (sometimes)
What actually causes this:
Unstable household power supply delivering voltage above the acceptable range.
First Thing to Check
Unplug the washer, wait one minute, and plug it back in to see if the error clears.
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions and operating voltage
- 2
2. Connect a tester to the internal power terminals during Boil or Dry operations and observe
- 3
3. Check whether a plug receptacle is used
- 4
4. If all power checks pass, replace the main PBA
This Error Applies To
Samsung WA50R5400A Series Washers (2022) (2022–present)
Related Error Codes
The washer's main computer has crashed.
The washer's main computer has crashed.
The vibration sensor may have failed.
An antibacterial system component has stopped working.
The water temperature sensor inside the wash tub is not reading correctly.
The temperature sensor for the drying function is not reading correctly.
The laundry inside the washer is bunched up on one side.
There are too many soap suds in the washer.