Error Code DC2
The door switch has overheated from being turned on and off too many times.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC2
What This Means
Power switch turned on/off continually generating excessive heat; Door switch unit defect due to power switch overuse; Main PCB defect
What actually causes this:
Rapidly and repeatedly pressing the power button causes the door switch to overheat.
First Thing to Check
Unplug the washer and let it sit for 15 minutes to cool down, then try again.
Parts Involved
How to Fix
- 1
1. Check whether the Power switch or a control panel button is being pressed continually
- 2
2. Check the state of the door switch unit
- 3
3. If the main PCB is defective, replace it
This Error Applies To
Samsung WA50R5400A Series Washers (2022) (2022–present)
Related Error Codes
The washer's main computer has crashed.
The washer's main computer has crashed.
The vibration sensor may have failed.
An antibacterial system component has stopped working.
The water temperature sensor inside the wash tub is not reading correctly.
The temperature sensor for the drying function is not reading correctly.
The laundry inside the washer is bunched up on one side.
There are too many soap suds in the washer.