Error Code 8C1
Your washer's vibration sensor has detected a data error.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Check detected in the MEMS PBA; Data check detected; Wire connection issues
What actually causes this:
The vibration sensor board has a loose connection or is malfunctioning.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections
- 2
2. Replace the MEMS PBA if necessary
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.