Error Code 9C2
Your washer is getting too much electrical power.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C2
What This Means
Consumer's power conditions are faulty; Over voltage is supplied; Main PBA fault (sometimes)
What actually causes this:
The electrical outlet is providing higher than normal voltage, which can damage the washer's electronics.
First Thing to Check
Unplug the washer immediately and try a different wall outlet.
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions and verify the operating voltage
- 2
2. Connect a tester to internal power terminals during Boil or Dry operations
- 3
3. Check the voltages
- 4
4. Check for Main PBA fault
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.