Error Code BC2

A button on your washer appears to be stuck or pressed too long.

Also displayed as: BC2

What This Means

Power button is pressed continually for more than 12 seconds; A switch is jammed or stuck due to deformation of the control panel or button; Screws that hold the sub PBA in place are tightened too much; A button other than the Power button is continually pressed for more than 30 seconds; Deformation of an internal plastic injection part; Main PBA IC has on/off switching fault

First Thing to Check

Parts Involved

How to Fix

1. 1

   1. Check whether either the Power switch or a defect of the main PCB is pressed continually

2. 2

   2. Check the contact between the control panel buttons and their corresponding tact switch

3. 3

   3. Check whether the service PBA holding screws are fastened too tight — if they are, loosen them a little

4. 4

   4. There must be a gap between a control panel button and its corresponding micro switch

5. 5

   5. The 'E2' check occurs if the main relay has occurred

6. 6

   6. Otherwise, a check occurs after approx. 30 seconds has pressed

7. 7

   7. If there is no check in the passed connections, replace the main PBA

This Error Applies To

Samsung WA52J8 Series Washers (2015) (2015–present)