Error Code DC
Your washer does not detect the lid as properly closed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC
What This Means
Switch contact check because of a deformation of the door hook; Door is pulled by force; Occurs in Boil wash because the door is pushed due to a pressure difference from internal temperature changes
What actually causes this:
The lid is not fully shut, or something is keeping it from closing completely, like a piece of laundry caught in the opening.
First Thing to Check
Open and firmly close the lid, making sure nothing is caught in the way.
Parts Involved
How to Fix
- 1
1. Check the Reed SW resistance between terminals — Resistance: Approx. 0.2 ohms (Checking Part: White-Green Wire)
- 2
2. Since 120V power is connected, check if door switch is defective
- 3
3. As this check occurs because the door is opened, close the door
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.