Error Code DC2
Your washer's lid lock has overheated from repeated use.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC2
What This Means
Occurs if the Power switch is turned on/off continually and too much heat is generated
What actually causes this:
Repeatedly turning the washer on and off too quickly, which overheats the door lock mechanism.
First Thing to Check
Unplug the washer and let it cool for 30 minutes before trying again.
Parts Involved
How to Fix
- 1
1. Check the wire disconnection
- 2
2. Check whether the door lock switch unit is damaged
- 3
3. If the door lock switch unit is defective, replace it
- 4
4. If the main PCB is defective, replace it
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.