Error Code PC1
Your washer's clutch position sensor is giving incorrect readings.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
After position of the clutch is detected, the signal of the clutch hall goes wrong; Clutch hall sensor malfunction
What actually causes this:
The sensor that tracks the clutch position has worn out or developed a fault.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connections
- 2
2. Verify clutch position detection
- 3
3. Replace clutch sensor or assembly if defective
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.