Error Code TC1
Your washer cannot properly measure the water temperature.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing heater sensor in the tub has a contact check or temperature sensor fault; Connector is connected incorrectly or is disconnected; Water level sensor operates without water because the water is frozen or other reason; Temperature sensor detects 100-150°C causing the machine to turn power off
What actually causes this:
The temperature sensor that monitors wash water has failed or has a loose connector.
First Thing to Check
Try running a cold water cycle to see if the washer works without temperature sensing.
Parts Involved
How to Fix
- 1
1. Check the washing heater temperature sensor connections and connector
- 2
2. Faulty and incorrect connections — A TC1 check occurs
- 3
3. If the washing heater temperature sensor has a functional error, replace it
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.