Error Code TC4
Your washer's power module is overheating.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: TC4
What This Means
IPM temperature is abnormally high; Main PCB fault
What actually causes this:
The washer's motor controller is running too hot, possibly from a blocked ventilation area or a failing component.
First Thing to Check
Make sure there is adequate space around the washer for air circulation.
Parts Involved
How to Fix
- 1
1. Check the IPM temperature conditions
- 2
2. Check for Main PCB fault
This Error Applies To
Samsung WA52J8 Series Washers (2015) (2015–present)
Related Error Codes
Your washer's water heating element has a specific fault.
Your washer's leak sensor has been triggered.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.
Your washer's control boards cannot talk to each other.
Your washer cannot detect the water level properly.
Your washer is not getting enough water to fill.
The water coming into your washer is too hot for the selected cycle.