How do I fix error code 4C2 on a Samsung washers?

1. undefined: 1. Check that the hot and cold water hoses are connected to the correct inlets 2. undefined: 2. Verify the home water heater is set to 120 degrees F or lower 3. undefined: 3. Run cold water at a nearby faucet for one minute before starting the cycle 4. undefined: 4. If the error persists, check the temperature sensor

Samsung Washers2024–present

Error Code 4C2

The incoming water is too hot for the delicate cycle selected

Moderate

Address soon - your appliance may not work properly

Also displayed as: 4C2

What This Means

Water temperature sensed higher than 50 degrees C in Wool or Lingerie course; Hot water supply connected to cold water inlet; Water heater temperature set too high

What actually causes this:

The hot and cold water hoses are swapped, or the water heater is set too high

First Thing to Check

Check that the hot and cold water hoses behind the washer are connected to the correct inlets

Parts Involved

Water Supply HosesTemperature Sensor

How to Fix

1
1. Check that the hot and cold water hoses are connected to the correct inlets
2
2. Verify the home water heater is set to 120 degrees F or lower
3
3. Run cold water at a nearby faucet for one minute before starting the cycle
4
4. If the error persists, check the temperature sensor