Error Code bC2
A dryer button is being registered as stuck or continuously pressed
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Button pressed over 30 seconds; Water on the window panel causing false touch; Connector connection with rear PCB abnormal
What actually causes this:
Water or moisture on the touch panel is causing it to register a phantom button press
First Thing to Check
Wipe the entire control panel and screen dry with a clean cloth
Parts Involved
How to Fix
- 1
1. Check if there is any water on the window panel
- 2
2. Check if the connector connection with the rear PCB is normal
- 3
3. Wipe the control panel dry
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly
The dryer heater temperature sensor is reading incorrectly
The humidity sensor inside the dryer is not reading correctly
The door lock has been forced too many times and is malfunctioning