Error Code dC2
The door lock has been forced too many times and is malfunctioning
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC2
What This Means
Door lock/unlock excessively operated while in door lock state; Door forcefully opened while locked
What actually causes this:
The door was repeatedly forced open while locked
First Thing to Check
Check if the door hangs evenly and closes without resistance
Parts Involved
How to Fix
- 1
1. Follow the same diagnostic steps as dC1
- 2
2. Check door sagging, CAM, and LEVER DOOR
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly
The dryer heater temperature sensor is reading incorrectly
The humidity sensor inside the dryer is not reading correctly