Error Code DC5
The automatic door-opening feature is not working after a cycle ends
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC5
What This Means
Insufficient space for the door to open; Door component defect; PBA defect
What actually causes this:
Something is blocking the washer door from opening, or the auto-open motor failed
First Thing to Check
Make sure nothing is blocking the washer door from swinging open freely
Parts Involved
How to Fix
- 1
1. Ensure that there is enough space for the door to open
- 2
2. Wait for the automatic door opening function to work properly
- 3
3. If the problem remains unresolved, inspect door components
- 4
4. Check for PBA defect
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
The humidity sensor inside the dryer is not reading correctly
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly
The dryer heater temperature sensor is reading incorrectly