How do I fix error code HC1 on a Samsung washers?

1. undefined: 1. Check heater engagement — ensure it is properly seated 2. undefined: 2. Measure heater resistance between A and B — should be 16.05 plus or minus 0.65 ohm 3. undefined: 3. If wash heater is faulty, replace it 4. undefined: 4. If heater is normal, replace the wash-thermistor at back of tub

Samsung Washers2024–present

Error Code HC1

Q: What does error code HC1 mean on a Samsung washers?

The washer heater is overheating or not seated properly Heater engagement fault (out of place); Washing heater short-circuited or wire disconnected; Temperature sensor fault; PBA relay malfunction

The washer heater is overheating or not seated properly

Critical

Stop using immediately - risk of damage or safety issue

Also displayed as: HC1

What This Means

Heater engagement fault (out of place); Washing heater short-circuited or wire disconnected; Temperature sensor fault; PBA relay malfunction

What actually causes this:

The heating element shifted out of position and is overheating

First Thing to Check

Turn off the washer immediately and unplug it — overheating can be a safety concern

Parts Involved

Washing HeaterWash-ThermistorMain PBA

How to Fix

1
1. Check heater engagement — ensure it is properly seated
2
2. Measure heater resistance between A and B — should be 16.05 plus or minus 0.65 ohm
3
3. If wash heater is faulty, replace it
4
4. If heater is normal, replace the wash-thermistor at back of tub